接枝改性PVDF基含氟聚合物

聚偏氟乙烯(PVDF基)含氟聚合物由于其独特的性能受到了广泛的关注。将功能化链段引入PVDF基含氟聚合物可以进一步提升其性能并拓展其应用领域。相较于物理共混法和直接共聚改性法,通过接枝改性法将功能化单体引入含氟聚合物的侧链具有更显著的优势,可便捷、高效地得到组成精确,结构可控的接枝共聚物。本文综述了通过活性自由基聚合(包括ATRP、SET-LRP、有机催化原子转移自由基聚合(O-ATRP)、光诱导Cu(Ⅱ)介导RDRP)和高能射线辐射(γ射线,紫外,电子束)等对PVDF基含氟聚合物功能化接枝改性的方法,并对其发展趋势以及改性聚合物的应用前景进行了展望。     

Study of electron-vibrational interaction and concentration quenching effect of Cu+ ions in lithium based sulphate phosphors

The objective of this work is to study electron-vibrational interaction (EVI) and concentration quenching and their manifestation in experimental photoluminescence spectra of Cu⁺ ion in various lithium based phosphors namely, Li₂SO₄, LiNaSO₄ and LiKSO₄. The main parameters of EVI, such as the Stokes shift, Huang-Rhys factor and zero-phonon line positions, were estimated. The studied systems shows strong electron lattice coupling. The validity of results was established by modeling the shape of the emission spectra, which was found to be in good agreement with experimental photoluminescence spectra. The concentration quenching study is also carried out for these compounds. The studied systems correspond to the nearest neighbor energy transfer mechanism.     

Water permeability in MXene membranes: Process matters

Recent studies have shown impressive transport behaviors of water and ions within lamellar MXene membranes,which endows great promise in developing advanced separation application based high performance MXene membranes.However,most of the researches focused on modification of MXene nanoflakes and optimizing interlayer distance,leaving the impact of membrane fabrication process marginal.In this work,we studied the water flux of membranes made by vacuum filtration using delaminated MXene nanoflakes as the building-blocks.Our results show that the water permeability is extremely sensitive to the process,especially at the drying process,loading and deposit rate of nanoflakes(the feeding concentration).We find that the voids from less ordered stack rather than in-plane defects and interlayer galleries contribute to the large water permeability.The voids can be effectively avoided via deposition of MXene nanoflakes at a slow rate.Manipulating the stack of MXene nanoflakes during vacuum filtration and drying are critical for development of MXene membranes with desired performance for water permeation.     

New insights into the impact toughness of ASA (acrylonitrile-styrene-acrylate) with controllable core–shell structure synthesized by three-stage seeded emulsion polymerization

Acrylonitrile-styrene-acrylate (ASA) with controllable core–shell structure was prepared through three-stage seeded emulsion polymerization. A series of characterizations had been performed to study the effect of different core–shell ratios on the properties of ASA. The most interesting was that the impact strength of ASA exhibited a “wave” variation instead of a linear variation with the increasing loading content of poly(butyl acrylate) (PBA) core. Moreover, the threshold of impact strength appeared at 49.725?wt% PBA content, nearly 33 kJ/m². To explain this unusual variation, an impact schematic was proposed.     

多孔软硬磁Ni0.5Zn0.5Fe2O4/SrFe12O19复合纤维制备及吸波性能

通过静电纺丝技术制备了多孔软硬磁Ni_0.5Zn_0.5Fe₂O₄/SrFe₁₂O₁₉复合纤维,利用综合热重分析仪（TG-DSC）、X射线衍射仪（XRD）、扫描电子显微镜（SEM）、透射电子显微镜（TEM）、X射线能谱仪（EDS）和矢量网络分析仪（VNA）等对复合纤维的晶体结构、微观形貌和电磁性能进行了表征,研究了不同软硬磁质量比对纤维结构和性能的影响。结果表明：900℃下制备的复合纤维具有立体多孔结构,软硬磁质量比为1∶3时,复合纤维的比表面积达到55 m²·g^-1。吸波性能测试结果显示,当吸波剂涂层厚度为3.5 mm时,复合纤维在10.6 GHz处反射损失（R_L）值达到-31.9 dB,在2~18 GHz频率范围内,R_L值小于-10 dB的吸收带宽达到10.5 GHz,覆盖了整个X波段（8.2~12.4 GHz）和Ku波段（12.4~18 GHz）,显示出优异的宽波段吸收性能。     

Parallelizing acquisitions of solid-state NMR spectra with multi-channel probe and multi-receivers: Applications to nanoporous solids

A five-channel (¹H, ¹⁹F, ³¹P, ²⁷Al, ¹³C) 2.5 mm magic-angle-spinning (MAS) nuclear magnetic resonance (NMR) probe is used in combination with three separate receivers for the parallel acquisitions of one (1D) and two-dimensional (2D) NMR spectra in model fluorinated aluminophosphate and porous Al-based metal-organic framework (MOF). Possible combinations to record simultaneously spectra using this set-up are presented, including (i) parallel acquisitions of quantitative 1D NMR spectra of solids containing nuclei with contrasted T₁ relaxation rates and (ii) parallel acquisitions of 2D heteronuclear NMR spectra. In solids containing numerous different NMR-accessible nuclei, the number of NMR experiments that have to be acquired to get accurate structural information is high. The strategy we present here, i.e. the multiplication of both the number of irradiation channels in the probe and the number of parallel receivers, offers one possibility to optimize this measurement time.     

Facile preparation of ZrCO composite aerogel with high specific surface area and low thermal conductivity

A novel ZrCO composite aerogel is synthesized using zirconium oxychloride and resorcinol–formaldehyde (RF) as precursors through the sol–gel route and carbothermal reduction process. The effects of different Zr/R molar ratios and calcination temperatures on the physical chemistry properties of ZrCO aerogels are investigated. The ZrCO composite aerogel consists of the C/ZrO₂/ZrC ternary aerogel. The results show that with the increase of R/Zr molar ratios, the specific surface area and bulk density increase with calcination temperature up to 1300?°C, but decrease at even temperature (1500?°C). The specific surface area is as high as 637.4?m²/g for ZrCO composite aerogel (R:Zr?=?2:1), which was higher than ever reported. As the heat-treatment temperature increases to 1500?°C, the ZrC crystalline phase occurs and the t-ZrO₂ phase still appears within the composite. The thermal conductivity of the carbon fiber mat-reinforced composite aerogel is as low as 0.057?W/m/K at room temperature (25?°C).

Open image in new window

     

Investigation of free volume and the interfacial,and toughening behavior for epoxy resin/rubber composites by positron annihilation

An epoxy resin (EP) matrix has been modified with carboxyl-randomized butadiene-acrylonitrile (CRBN) rubber and hydroxyl-terminated butadiene-acrylonitrile rubber (HTBN). When the rubber content was low (⩽5%), the free volume size varied slowly, meanwhile, the free volume size of EP/HTBN system was smaller than EP/CRBN system. With further addition of rubber component (⩾7%), the free volume size of the composite increased quickly. In this case, the free volume size of EP/HTBN system was larger than EP/CRBN system. The intermediate positron lifetime component (I₂) was affected by the structure of the interface layer between rubber particles and EP matrix. The different free volume properties could be attributed to the compatibility between rubber and EP.     

Derivation of the N-step interdeparture time distribution in GI/G/1 queueing systems

The departure process of a queueing system has been studied since the 1960s. Due to its inherent complexity, closed form solutions for the distribution of the departure process are nearly intractable. In this paper, we derive a closed form expression for the distribution of interdeparture time in a GI/G/1 queueing model. Without loss of generality, we consider an embedded Markov chain in a general K_M/G/1 queueing system, in which the interarrival time distribution is Coxian and service time distribution is general. Closed form solutions of the equilibrium distribution are derived for this model and the Laplace–Stieltjes transform (LST) of the distribution of interdeparture times is presented. An algorithmic computing procedure is given and numerical examples are provided to illustrate the results. With the analysis presented, we provide a novel analytic tool for studying the departure process in a general queueing model.     

Grain size engineering and growth mechanism in hydrothermal synthesis of Bi0.5Na0.5TiO3 thin films on Nb-doped SrTiO3 substrates

Journal of Sol-Gel Science and Technology - Considering the full utilization of energy and pursuing thin-film capacitors with high energy-storage density, the grain size engineering is used to...